|
TSM600 Bunded Steel Fuel Tank
3000 Litre / 600 Gallons Capacity
Length Width Height
2480mm 1380mm 1260mm
Tare Weight 860 (kg)
U.N Certified
110% bunded tank in accordance with PPG2
(Pollution Prevention guidelines)
Fully compliant with current regulations
Ideal for refuelling plant and machinery,
groundcare equipment, supplying generators etc
Specification:
Lockable bund lid with gas strut to hold open for access to pump etc
Stackable design, can be lifted full of fuel using the lifting eyes
Standard delivery equipment: Hand Pump 4 metres of hose and nozzle
Fitted with level indicator, automatic breather & Pressure relief
Applications
Bunded Metal Storage and Dispensing Tank suitable for use with Diesel (D) and BioDiesel [with a bio element not exceeding 5% concentration] fuel at agricultural, commercial, industrial and institutional installations.
Fully compliant with all relevant product requirements contained within The Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006 and comparable requirements throughout the United Kingdom.
Installation Requirements
This tank must be installed by a suitably competent person in accordance with statutory requirements.
All mains electrical connections must only be undertaken by a qualified electrician in accordance with prevailing statutory requirements. It is recommended that all 240v Bunded Fuel Stations are connected to an RCD protected mains power supply.
Delivery and Payment
Price(s) stated are inclusive of delivery to any address in Mainland UK, excluding offshore locations and subject to access for an articulated lorry. If access to your premises is restricted please advise at time of order placement.
Please note it is the customer’s responsibility to arrange for the tank to be offloaded from the delivery vehicle to the customer’s premises and due to the weight & Dimensions of this product, a suitable lift truck / telehandler, crane or similar lifting device will be required for offloading. |