|
BC-200 Centrifuge for Biodiesel / Bio-diesel,
Engine Oil and Waste Vegetable Oil
1135 Litres/hour
 Min operating pressure is 40 PSI
150 Micron filter upstream is required
-
Runs at approx 4,100 RPM at 90 PSI. (can get a bit noisey)
-
It holds 2.38 kg of solids and water contamination mix.
-
It processes 1135 LPH
-
Cost Includes mounting plate and control valve.
The smaller, cheaper BC-50 produces approximately 25% more centrifugal force than the BC-200.
-
So the issue is how much time do you want to run the centrifuge unattended to clean the oil and what is the volume of the oil you have to clean.
-
Multiple BC-50’s are more efficient that one BC-200 based on centrifugal force.
-
Based on pounds to spend you can buy three BC-50’s for the same amount.
-
You will clean 20.5 Litres per minute and with 25% more force that one BC-200 cleaning 19 Litres per minute.
-
You will have to clean or exchange rotors on the BC-50 every one to three hours.
Adaptor Plate included
Pump to suit (click image)
|
Centrifuge for Biodiesel / Bio-diesel, Engine Oil and Waste Vegetable Oil @ 410 LPH
